Mạch Bay Matek F405-VTOL

Mạch Bay Matek F405-VTOL
Mã SP: Mạch Bay Matek F405-VTOL

1,450,000 VNĐ

- +

0936.336.128

Địa chỉ mua hàng

Thông tin sản phẩm

Đánh giá nhận xét

About this product

The MATEKSYS F405-VTOL Flight Controller features 25x25 and 35x35 mounting patterns and weighs 25g. It features a Barometer, BlackBox MicroSD, 6x UARTS, 4x ADC, 12x PWM outputs, 2x PINIO (Camera switch, P101 pad), PDB for 5x individual ESC/Motors, 6.8-30V DC IN (2-6S LiPo), 220A High-precision current sensor, BEC 5V 2A for FC and peripherals, BEC 9V 2A (12V options for Camera/VTX), BEC VX 8A cont. 10A Peak for servos.

Features

BEC VX 8A cont. 10A Peak for servos (5V,6V,7.2V option)
BEC 9V 2A, 12V option for Camera/VTX
2x PINIO (Camera switch, P101 pad)
25x25 and 35x35 mounting patterns
220A High-precision current sense
BEC 5V 2A for FC and peripherals
PDB for 5x individual ESC/Motors
6.8-30V DC IN (2-6S LiPo)
MCU STM32F405RGT6
Barometer SPL06-001
BlackBox MicroSD
12x PWM outputs
IMU ICM42688-P
OSD AT7456E
6x UARTS
4x ADC

MATEKSYS F405-VTOL Flight Controller Infographic

Specifications

Mounting: 25 x 25mm-Φ2mm, 35 x 35mm- Φ4mm
Built in inverter on UART2-RX for SBUS input
MCU: STM32F405RGT6, 168MHz , 1MB Flash
USB/Beep Extender with Type-C(USB2.0)
6x UARTs, 1x Softserial_Tx option(INAV)
4x ADC (VBAT, Current, RSSI, Airspeed)
Weight: 25g w/ USB/buzzer adapter
Switchable Dual Camera Input
1x spare PINIOOSD: AT7456E
Dimensions: 45 x 42 x 15mm
Blackbox: MicroSD card slot
12x PWM outputs
IMU: ICM42688-P
Baro: SPL06-001
1x I2C

FC Firmware

INAV: MATEKF405TE_SD (INAV 5.0 or newer)
ArduPilot: MatekF405-TE

PDB

Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter
Support continuous load of up to 100A on ESC pad near the current sensor resistor
Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
Sense resistor: 100A continuous, 220A peak
5x ESC power pads, total 100A continuous
Input voltage range: 6.8~30V (2~6S LiPo)

BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps

BEC 9V /12V output

For stable 9V/12V output, input voltage should > output voltage +1V
Designed for Video Transmitter, Camera, Gimbal ect
Continuous current: 2 Amps
12V option with Jumper pad

BEC Vx output

for stable Vx output, input voltage should > Vx voltage +1V
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 8 Amps, 10A Peak
Designed for Servos

BEC 3.3V output

Designed for Baro / Compass module and external 3.3V peripherals
Continuous current: 200mA
Linear Regulator

IMPORTANT NOTES

Board is shipped unsoldered.

Includes

1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
1x MATEKSYS F405-VTOL Flight Controller
1x Rubycon ZLH 35V 470uF capacitor

Xem thêm

TẠI SAO BẠN NÊN CHỌN CHÚNG TÔI

Thương hiệu lâu năm, 1 trong những cửa hàng lâu đời nhất còn đang tồn tại và phát triển.
Sản phẩm chính hãng, đa dạng về chủng loại, giá cả.
Đội ngũ kiến trúc giàu kinh nghiệm, trung thực, tận tâm với khách hàng.
Chế độ hậu mãi hợp lí, cân bằng lợi ích cả 2 bên.
Vận chuyển miễn phí cho khu vụ nội thành với đơn hàng trên 2 triệu đồng.
Kiểm tra hàng, thanh toán tại nhà khi nhận hàng.