Camera Walksnail Avatar HD V2 (Dual antenna)

Camera Walksnail Avatar HD V2 (Dual antenna)
Mã SP: Camera Walksnail Avatar HD V2 (Dual antenna)

3,490,000 VNĐ

- +

Thông tin sản phẩm

Đánh giá nhận xét

The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it's better fit for regular FPV race as well.

The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.

The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.

New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability . Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.

The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.

Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate.

Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.

Q: Do we support 1080P 120FPS?
A: Our VTX products all support 1080P/120FPS, and can reach 1080P/120FPS through firmware upgrade is around the corner.

Specification
Camera
Model	Avatar V2 camera
Image Sensor	1/3.2-Inch 4Mp 4:3sensor
Resolution	1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
Ratio	4:3 native /16:9
Lens	2.1mm
FOV	160°
Aperture	F2.0
Shutter	Rolling shutter
Min.Illumination	0.001Lux
Weight	7.2g
Dimensions	191922mm
Coaxial Cable	140mm
Gyroflow	Only 32G VTX Supported
VTX
Model	Avatar V2 module(Dual Antenna)
Communication Frequency	5.725-5.850GHz
Transmitter Power (EIRP)	FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
1/O Interface	JST1.04(Power in)JST0.86(USB)
Mounting Holes	25.525.5mm; 2020mm
Dimensions	33.533.510.5mm
Storage	32G
Recording	1080p/720p
Weight	15.4g
Operating Temperature	-20-40℃
Channels	8
Wide Power Input	6V-25.2V
Supported FC System	Betaflight; Inav; Fettec; ArduPilot; Kiss
OSD	Canvas mode
Latency	Average delay 22ms
Antenna	2(IPEX)
Avatar V2 antenna
Polarization	LHCP
Bandwidth	5600MHz-6000MHz
Gain	1.9dBi
VSWR	≤1.5
Input Impedance	50Ω
Interface	IPEX-1
Size	R15 X 45mm （without cable）
Weight	2g
Packing List
USB transfer extension cable	X1
4 Pin silicone cable	X1
M2*4mm screws	X8
M2*5mm screws	X4
M2*6mm screws	X4
M2*14mm screws	X4
M250.5mm gasket	X4

Xem thêm

Thương hiệu lâu năm, 1 trong những cửa hàng lâu đời nhất còn đang tồn tại và phát triển.
Sản phẩm chính hãng, đa dạng về chủng loại, giá cả.
Đội ngũ kiến trúc giàu kinh nghiệm, trung thực, tận tâm với khách hàng.
Chế độ hậu mãi hợp lí, cân bằng lợi ích cả 2 bên.
Vận chuyển miễn phí cho khu vụ nội thành với đơn hàng trên 2 triệu đồng.
Kiểm tra hàng, thanh toán tại nhà khi nhận hàng.