Gimbal Radiomaster AG01 Cnc Hall Sensor

Gimbal Radiomaster AG01 Cnc Hall Sensor - Green
Mã SP: Gimbal Radiomaster AG01 Cnc Hall Sensor - Green

2,800,000 VNĐ

- +

0936.336.128

Địa chỉ mua hàng

Thông tin sản phẩm

Đánh giá nhận xét

We previously only offered the standard version of black AG01 gimbals. Now it's time to show your true colors with the AG01 color gimbals! Built to the same cutting-edge precision as the black AG01s, the color AG01s will look fly while you're on the fly!

The color options are Purple, Gold, Blue, Red, and Green. All color AG01 gimbals are now shipped with preinstalled Sticky360 Gimbal Sticks Ends.

AG01 CNC Hall Gimbals New Color Options

Launch Video

Key Features

Sicky360 gimbal stick ends - 360° Non-slip geometry with dual-ring design increases comfort and contact.
Made with CNC processed aviation grade aluminum.
Non-contact hall sensors, for accurate control inputs and precise centering.
Quad precision bearings, for unparalleled stick feel.
Improved package, to better protect the AG01 Gimbals.

Specification

Item: AG01 CNC Hall Gimbal Sets
Colors: Red, Blue, Gold, Green, Purple
Sensing type: Hall
Working voltage: DC 3.3V
Linearity: Real-time (No delay)
Adjustable travel range: 38°—54°
Adjustable mode: Yes
Adjustable tension: Yes
Quad bearing: Yes
Temperature range: -20°c-85°c
Size: 60*53*56mm
Weight: 162g/set

RadioMaster Sticky360 gimbals sticks ends

EXTERIOR ADJUSTABLE

① Set the lower travel limit: Turn the screw clockwise to reduce the travel. Turn the screw counterclockwise to increase the travel. Travel range (38-54°)
② Set the upper travel limit: Turn the screw clockwise to reduce the travel. Turn the screw counterclockwise to increase the travel. Travel range (38-54°)
③ Up and down spring tension: Turn the screw
clockwise to increase the up and down spring tension.
Turn the screw counterclockwise to reduce the up and down spring tension.
④ Centering and Mode adjustment: When the screw is turned clockwise to its lowest point, this gimbal will not center in its up and down axis when the stick is released. When the screw is turned counter-clockwise to its highest point, this gimbal will center its up and down axis when the stick is released.
⑤ Left and right spring tension: Turn the screw clockwise to increase the left and spring tension. Turn the screw counterclockwise to reduce the left and right spring tension.
Throttle tension adjustment: When there is no tension up and down, the ⑥screw adjusts the tension tightness, and the ⑦screw adjusts the scale tightness.

Size

Associated Products

Package Includes

1 * AG01 CNC Hall Gimbal (Throttle)
1 * AG01 CNC Hall Gimbal (Centering)
2 * TX16S Softer Tension Spring Set
2 * Hexagon socket screwdriver
1 * Manual

Xem thêm

TẠI SAO BẠN NÊN CHỌN CHÚNG TÔI

Thương hiệu lâu năm, 1 trong những cửa hàng lâu đời nhất còn đang tồn tại và phát triển.
Sản phẩm chính hãng, đa dạng về chủng loại, giá cả.
Đội ngũ kiến trúc giàu kinh nghiệm, trung thực, tận tâm với khách hàng.
Chế độ hậu mãi hợp lí, cân bằng lợi ích cả 2 bên.
Vận chuyển miễn phí cho khu vụ nội thành với đơn hàng trên 2 triệu đồng.
Kiểm tra hàng, thanh toán tại nhà khi nhận hàng.