Himodel Professional Series 40A
Mã SP: Himodel Professional Series 40A

  • 550,000 VNĐ
  • Thông tin sản phẩm

    Đánh giá nhận xét

    Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

    Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

    Programmable Items:

    ●Brake Settings:brake enabled / brake disabled, default is brake disabled

    ●Battery Type:Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd),default is Li-xx.

    ●Low Voltage Protection Mode(Cutoff Mode) :power reducing / power cutoff, default is power reducing.

    ●Low Voltage Protection Threshold(Cutoff Threshold) :low / medium / high, default is medium cutoff voltage.

    1) For Li-xx battery,number of battery cells are judged automatically,low / medium / high cutoff voltage for each cell are: 2.5V/2.75V/3.0V. For example: 3 Cell Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.75*3=8.25V.

    2) For Ni-xx battery, low / medium / high cutoff voltages are 60%/65%/70% of the startup voltage. For example: 6 cell NiMH battery, fully charged voltage is 1.44*6=8.64V, when low cutoff voltage is set, the cutoff voltage is : 8.64*60%=5.2V。


    ●Startup mode: normal / soft / super-soft, default is normal startup.

    ●Timing: low / medium / high, default is medium timing.

    In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

    Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.



    Advantages

    Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the prevention of unwanted RF Noise/ Interference during flying.

    Dual PCBs: Control circuit and MOSFET circuit use separate PCB, adiabatic air gap between 2 PCBs reduces the heat exchange form MOSFET to control circuit, so the ESC works more reliable.

    Extreme low resistance, super current endurance.

    Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

    CE certified, click here for CERTIFICATE OF COMPLIANCE



    Specifications:

    Type: Professional-40A

    Output: Continues 40A, Burst 55A up to 10 Secs.

    Voltage Input: Lithium : 2 – 6s or NiMH/NiCd 5 -18 Cells Note: 4S and 4S above must be with BEC disabled

    BUILT-IN Switch MODE BEC (Battery Elimination Circuit) Output:3A;

    Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrusheLess Motor)

    Size:28 x 55 x 12mm(width*length*high)

    Weight: 33g
    Xem thêm

    TẠI SAO BẠN NÊN CHỌN CHÚNG TÔI

    logo

       

      • Thương hiệu lâu năm, 1 trong những cửa hàng lâu đời nhất còn đang tồn tại và phát triển.
      • Sản phẩm chính hãng, đa dạng về chủng loại, giá cả. 
      • Đội ngũ kiến trúc giàu kinh nghiệm, trung thực, tận tâm với khách hàng.
      • Chế độ hậu mãi hợp lí, cân bằng lợi ích cả 2 bên. 
      • Vận chuyển miễn phí cho khu vụ nội thành với đơn hàng trên 2 triệu đồng.
      • Kiểm tra hàng, thanh toán tại nhà khi nhận hàng.

       

    Hotline: 0936.336.128
    Để lại lời nhắn cho chung tôi