Holybro Pixhawk 6C Mini-Model B &PM02 12S &M10 GPS Set

Holybro Pixhawk 6C Mini-Model B &PM02 12S &M10 GPS Set
Mã SP: Holybro Pixhawk 6C Mini-Model B &PM02 12S &M10 GPS Set

4,240,000 VNĐ

- +

0936.336.128

Địa chỉ mua hàng

Thaituan-hobby (1 sp)

Thông tin sản phẩm

Đánh giá nhận xét

Description

The Pixhawk® 6C Mini is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It shares the same STMH743 microprocessor and sensors as the Pixhawk® 6C. Compared to the standard Pixhawk® 6C, this Mini version has a built-in PWM header, and some ports have been removed to fit this Mini form factor.

Inside the Pixhawk® 6C Mini, you can find an STMicroelectronics®-based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The Pixhawk® 6C Mini's H7 microcontroller contains the Arm® Cortex®-M7 core running up to 480 MHz and has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.

The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost-effective while having IMU redundancy. A vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.

The Pixhawk® 6C Mini is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial applications.

Key Design Points

High performance STM32H743 Processor with more computing power & RAM
New cost-effective design in a small form factor
IMU redundancy with sensor technology from Bosch® & InvenSense®
Integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
Hardware switchable 3.3V or 5V PWM signal mode (requires opening the casing)

Specification

Processors & Sensors

FMU Processor: STM32H743
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM
IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
- Accel/Gyro: ICM-42688-P
- Accel/Gyro: BMI055
- Mag: IST8310
- Barometer: MS5611

Electrical data

Voltage Ratings:
- Max input voltage: 6V
- USB Power Input: 4.75~5.25V
- Servo Rail Input: 0~36V
Current Ratings:
- Telem1 & GPS2 combined current limit: 1.5A
- All other ports combined current limit: 1.5A
Operating temperature: -40 ~ 85°c

Mechanical data

Dimensions (Model A): 53.3 * 39 * 16.2 mm
Dimensions (Model B): 58.3 * 39 * 18.15 mm
Weight (Model A): 39.2g
Weight (Model B): 46.8g

Reference Link

Note

M10 GPS Requires PX4 1.14 & ArduPilot 4.3 or newer.
Power module comparison chart

Includes:

Pixhawk 6C Mini-Model A / Model B Flight Controller
PM02 V3 12S Power Module
M10 GPS
Cable Set

Xem thêm

TẠI SAO BẠN NÊN CHỌN CHÚNG TÔI

Thương hiệu lâu năm, 1 trong những cửa hàng lâu đời nhất còn đang tồn tại và phát triển.
Sản phẩm chính hãng, đa dạng về chủng loại, giá cả.
Đội ngũ kiến trúc giàu kinh nghiệm, trung thực, tận tâm với khách hàng.
Chế độ hậu mãi hợp lí, cân bằng lợi ích cả 2 bên.
Vận chuyển miễn phí cho khu vực nội thành với đơn hàng trên 2 triệu đồng.
Kiểm tra hàng, thanh toán tại nhà khi nhận hàng.