Mạch Bay Matek H743-WING V3
Mã SP: Mạch Bay Matek H743-WING V3

  • 2,260,000 VNĐ
  • Thông tin sản phẩm

    Đánh giá nhận xét

    Matek's H743-WING V3 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running at 480MHz, dual gyro - ICM42688-P(SPI1) + ICM42605(SPI4), DPS310 (I2C2) barometer, and much more. 

    Compared to V2, the board now has updated gyros and color has changed to blue.

    Specifications:

    • MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
    • IMU: ICM42688-P(SPI1) + ICM42605(SPI4)
    • Baro: Infineon DPS310 (I2C2)
    • OSD: AT7456E (SPI2)
    • Blackbox: MicroSD card slot (SDIO)
    • 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
    • 13x PWM outputs(including “LED” pad)
    • 2x I2C
    • 1x CAN
    • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
    • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
    • 1x SPI3 breakout
    • USB/Beep Extender with Type-C(USB2.0)
    •  
    • Dual Camera Inputs switch
    • 5V/9V(12V) for Camera/VTX power switch
    • High-Precision Current Sense (90A Continuous, 220A Peak)
    • Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV,  BATT_VOLT_MULT 11.0 in ArduPilot)
    • ADC VB2 voltage divider: 1K:20K
    • ADC AirSpeed voltage divider: 20K:20K
    • Static power 160mA@5V
    •  
    • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
    • Dimensions: 54 x 36 x 13 mm
    • Weight: 30g with USB extender

    Firmware:

    • ArduPilot(ChiBiOS): MATEKH743
    • INAV: MATEKH743

    PDB:

    • Input voltage range: 8~36V (3~8S LiPo) w/TVS protection
    • 2x ESC power pads
    • Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)
    • Sense resistor: 90A continuous, 220A peak.

    BEC 5V output:

    • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
    • Output 5.15  +/- 0.1V DC
    • Continuous current 2 Amps,  3A Peak

    BEC 9V /12V output:

    • Designed for Video Transmitter, Camera, Gimbal ect.
    • Continuous current 2 Amps,  3A Peak
    • 12V option with Jumper pad

    BEC Vx output:

    • Designed for Servos
    • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
    • Continuous current 8 Amps,  10A Peak

    BEC 3.3V output:

    • Linear Regulator
    • Continuous current: 200mA

    Includes:
    1x Matek H743-WING V3 Flight Controller
    1x USB (Type-C ) / Passive Buzzer Extender
    1x 20cm JST-SH-6P to JST-SH-6P cable for USB Extender
    2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C Port
    1x Rubycon ZLH 35V 470uF Capacitor
    Dupont 2.54 pins (Board is shipped Unsoldered)

    Xem thêm

    TẠI SAO BẠN NÊN CHỌN CHÚNG TÔI

    logo

       

      • Thương hiệu lâu năm, 1 trong những cửa hàng lâu đời nhất còn đang tồn tại và phát triển.
      • Sản phẩm chính hãng, đa dạng về chủng loại, giá cả. 
      • Đội ngũ kiến trúc giàu kinh nghiệm, trung thực, tận tâm với khách hàng.
      • Chế độ hậu mãi hợp lí, cân bằng lợi ích cả 2 bên. 
      • Vận chuyển miễn phí cho khu vực nội thành với đơn hàng trên 2 triệu đồng.
      • Kiểm tra hàng, thanh toán tại nhà khi nhận hàng.

       

    Hotline: 0936.336.128
    Để lại lời nhắn cho chung tôi