Holybro Pixhawk 6X Pro Standard Set V2A + PM02D

Holybro Pixhawk 6X Pro Standard Set V2A + PM02D
Mã SP: Holybro Pixhawk 6X Pro Standard Set V2A + PM02D

21,500,000 VNĐ

- +

Tạ Duy Thái - 0936.336.128

Địa chỉ mua hàng

Thông tin sản phẩm

Đánh giá nhận xét

Key Design Point

High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applications
All-New advanced durable vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applications
Triple redundant IMU & double redundant barometer on separate buses
High-performance STM32H753 Processor
Modular flight controller: separated IMU, FMU, and Base system
The safety-driven design incorporates sensors from different manufacturers and model lineups
Independent LDO powers every sensor with independent power control.
Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination).
Temperature-controlled IMU board, allowing the optimum working temperature of IMUs
Hardware switchable 3.3V or 5V signal mode (requires baseboard modification)

All new Vibration Isolation Design

This new vibration isolation design uses a custom-formulated, durable silicone-based isolation material in place of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with a resonance frequency in the higher spectrum, perfect for industrial and commercial drones.

Note:

FC Module + a baseboard is required for this product to function. An FC Module or a Baseboard by itself will not function.

Specification

Processors & Sensors

FMU Processor: STM32H753
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
- Accel/Gyro: ADIS16470
  - ±40g, Vibration Isolated, Industrial IMU
- Accel/Gyro: IIM-42652
  - ±16g, Vibration Isolated, Industrial IMU
- Accel/Gyro: ICM-45686 with BalancedGyro™ Technology
  - ±32g, Hard Mounted
- Barometer: ICP20100
- Barometer: BMP388
- Mag: BMM150
NXP EdgeLock SE050 Plug & Trust hardware secure element

Electrical data

Voltage Ratings:
- Max input voltage: 6V
- USB Power Input: 4.75~5.25V
- Servo Rail Input: 0~36V
Current Ratings:
- Telem1 & GPS2 combined current limit: 1.5A
- All other ports combined current limit: 1.5A
Operating Temperature: -25-85°C

Mechanical data

Dimensions
- Flight Controller Module: 38.8 x 31.8 x 30.1mm
- Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum)
- Mini Baseboard: 43.4 x 72.8 x 14.2 mm
Weight
- Flight Controller Module: 50g
- Standard Baseboard: 72.5g (Aluminum)
- Mini Baseboard: 26.5g

Reference Links:

Package Includes

SKU 11070 Includes:

Pixhawk 6X Pro Flight Controller Module
Optional IMU Damping Replacement (softer than pre-installed)

Controller + Baseboard + Power Module Set Includes:

Pixhawk 6X Pro Flight Controller Module

Pixhawk Standard Baseboard v2A/ Pixhawk Standard Baseboard v2B/ Mini Baseboard

PM02D HV Power Module

Cable Set

Accessories:

Xem thêm

TẠI SAO BẠN NÊN CHỌN CHÚNG TÔI

Thương hiệu lâu năm, 1 trong những cửa hàng lâu đời nhất còn đang tồn tại và phát triển.
Sản phẩm chính hãng, đa dạng về chủng loại, giá cả.
Đội ngũ kiến trúc giàu kinh nghiệm, trung thực, tận tâm với khách hàng.
Chế độ hậu mãi hợp lí, cân bằng lợi ích cả 2 bên.
Vận chuyển miễn phí cho khu vực nội thành với đơn hàng trên 2 triệu đồng.
Kiểm tra hàng, thanh toán tại nhà khi nhận hàng.